![\"\"](\"https:\/\/www.rushworth.us\/lisa\/wp-content\/uploads\/2026\/10\/Threads-Settings.jpg\")
<\/a><\/p>\nScroll down and use the drop-down to select “Custom Size” in the hoop selection<\/p>\n
Input the dimensions of the hoop and give it a name (The 6×10 frame for our Bernette is called “Bernette B70 – Large”<\/p>\n You can also adjust some values to control the stitch density — these are the settings I am using for dense designs being embroidered on t-shirts.<\/p>\n Upload the image —<\/p>\n Adjust the size (if needed), select the number of thread colors. For now, I’m leaving the fill method set to the defaults!<\/p>\n Scroll down and click the “AI Layers” button<\/p>\n This will break your image into layers and begin the digitization process.<\/p>\n Click on each layer – you can adjust the settings used to compute stitches for the layer. You can change the color, use a different fill pattern, adjust density settings.<\/p>\n Once you have checked each layer, go back to the image settings page and click “Digitize”<\/p>\n Don’t forget to save the digitized project<\/p>\n You can sort the patterns by “Client” — I made sections for each of us<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n